SPECIFICATIONS:
WORKING SURFACE OF TABLE ................. 10" x 50"
LONGITUDINAL TABLE TRAVEL ................ 32"
CROSS TABLE TRAVEL ....................... 16"
KNEE TRAVEL .............................. 16"
RAM TRAVEL ............................... 15"
QUILL TRAVEL ............................. 5"
SPINDLE TAPER ............................ R8
QUILL DIAMETER ........................... 3-3/8"
VARIABLE SPINDLE SPEEDS .................. 60 TO 4200 RPM
SPINDLE FEEDS(3) ................... .0015, .003, .006" IPR
MAXIMUM TABLE LOAD ....................... 850 LBS
FLOOR SPACE: ............................. 71" x 60" x 84"
WEIGHT APPROXIMATELY: .................... 2,850 LBS.
EQUIPPED WITH:
PROTO-TRAK M2 2-AXIS CNC CONTROL SYSTEM
WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS
LINEAR & CIRCULAR INTERPOLATION, PROGRAM DOWNLOAD,
BOLT HOLE PATTERNS, PART GRAPHICS, CANNED CYCLES,
RS232& MUCH MORE
IN MANUAL OPERATION, CONTROL BECOMES 3 AXIS DIGITAL READOUT
COOLANT SYSTEM WITH CHIP PAN
GROUND BALLSCREWS ON TABLE & SADDLE
CHROME HARDENED & GROUND QUILL
DOVETAIL WAYS ON Y & Z AXIS
SQUARE Y AXIS WAYS
LUBRICATION SYSTEM
3 HORSE POWER MAIN MOTOR
Erickson Universal Kwik-Switch Spindle Adapter & Assorted Tooling
Remote Start/Stop
Call Marc @ (732) 390-0006 To Inspect In Plant Under Power in NJ
| Dimensions | 71" x 60" x 84" | 71" x 60" x 84" |
| Weight | 2850 Lbs. | 2850 Lbs. |
SPECIFICATIONS:
WORKING SURFACE OF TABLE ................. 10" x 50"
LONGITUDINAL TABLE TRAVEL ................ 32"
CROSS TABLE TRAVEL ....................... 16"
KNEE TRAVEL .............................. 16"
RAM TRAVEL ............................... 15"
QUILL TRAVEL ............................. 5"
SPINDLE TAPER ............................ R8
QUILL DIAMETER ........................... 3-3/8"
VARIABLE SPINDLE SPEEDS .................. 60 TO 4200 RPM
SPINDLE FEEDS(3) ................... .0015, .003, .006" IPR
MAXIMUM TABLE LOAD ....................... 850 LBS
FLOOR SPACE: ............................. 71" x 60" x 84"
WEIGHT APPROXIMATELY: .................... 2,850 LBS.
EQUIPPED WITH:
PROTO-TRAK M2 2-AXIS CNC CONTROL SYSTEM
WITH SERVO MOTORS, MANUAL DATA INPUT 2 AXIS
LINEAR & CIRCULAR INTERPOLATION, PROGRAM DOWNLOAD,
BOLT HOLE PATTERNS, PART GRAPHICS, CANNED CYCLES,
RS232& MUCH MORE
IN MANUAL OPERATION, CONTROL BECOMES 3 AXIS DIGITAL READOUT
COOLANT SYSTEM WITH CHIP PAN
GROUND BALLSCREWS ON TABLE & SADDLE
CHROME HARDENED & GROUND QUILL
DOVETAIL WAYS ON Y & Z AXIS
SQUARE Y AXIS WAYS
LUBRICATION SYSTEM
3 HORSE POWER MAIN MOTOR
Erickson Universal Kwik-Switch Spindle Adapter & Assorted Tooling
Remote Start/Stop
