150 Ton Dake Model Force 150, 59" Btw Uprights, 19" Ram Travel
| Tonnage | 150 T | 136.078 t |
| Stroke | 19" | 482.6 mm |
| Daylight | 14" - 35" | 889 mm |
| Bed (L-R) | 59" | 1,498.6 mm |
| Up or Downstroke? | Downstroke | Downstroke |
| IPM Closing | 49 in/min. | 124.5 cm/min. |
| IPM Pressing | 7 in/min. | 17.8 cm/min. |
| Dimensions | 98" x 47" x 106" H | 98" x 47" x 106" H |
| Weight | 5,711 lbs. | 5,711 lbs. |
New 150 Ton Dake Force 150 H-Frame Press
Electric Operation
Model Number: Force 150
Capacity: 150 Tons
Motor: 4 HP 220V 3-Phase
Width Between Uprights: 59"
Width Between Table Channels: 14"
Ram To Table: 14" - 35"
Ram Travel: 19"
Footprint: 98" x 47"
Height: 106"
Weight: 5,711 lbs.
Base: 98" x 47"
Ram Advance Speed: 49"/minute
Pressing Speed: 7"/minute
FEATURES:
Double acting cylinder design with 5-part oil seals for smooth operation and a tight seal
Welded heavy steel plate frame for greater rigidity
All electrical controls are low voltage (24V)
Preset and factory-sealed relief valve to prevent exceeding pressure capacity
Ram has lifting eyes that attach a chain to hydraulically move the table
2 HP submerged motor drives two centrifugal pumps for quiet, steady oil flow
Smooth, responsive control valve
Rapid advance of the ram to the workpiece – speed shifts automatically when contact is made
STANDARD EQUIPMENT:
Frame
2 Steel Table Plates
Lifting Chain
Workhead
Pressure Gauge
Safety Relief Valve
