Introducing AWEA with mature manufacturing abilities and advanced technology skills, the AF-II series. They are based on a high rigidity structure and three axes high precision linear guideway design with fast arm type ATC and chip conveying system. It is to provide you with fast, strong, stable machining performance. AF-II series are broadly used in high precision machine parts manufacturers, which can easily meet your demands of today and tomorrow.
Key Features:
• High-precision linear guideway design is used on three axes to provide optimum control and efficient movement. Also, based on the actual machining application, customers can either select roller type or ball type linear guideway.
• The rotary operation panel and the large width of the protection door provide a convenient operation display and spacious space for loading and unloading parts.
High Rigidity Structure
• The contact surface of the column and bed are all hand scraped to ensure precision assembly, strong structure, and loading balance.
• (Delta) Wide-span column structure provides optimal machining rigidity. The headstock retains stability and accuracy even under high-speed traveling.
• One-piece ball screw driving motor support and bearing support enable cutting force to spread evenly into the casting body, so it efficiently enhances the axial system of entire rigidity and prevents deformation of the ball screw.
• High rigidity roller type linear guideway which combines heavy cutting ability from ground box way and fast movement with low abrasion ability from linear guideway completely improves rigidity and control of machine
• High-precision dual-nuts ball screw provides excellent heavy cutting rigidity while ensuring machining accuracy and extending the durability of the ball screw.
• Three axial system is adopted with FANUC αi absolute AC servo motor direct drive to provide great thrust and fast acceleration/deceleration movement.
| X-Axis Travel | 62.992" | 1,600 mm |
| Y-Axis Travel | 29.134" | 740 mm |
| Z-Axis Travel | 24.016" | 610 mm |
| Table Size-X | 66.929" | 1,700 mm |
| Table Size-Y | 29.134" | 740 mm |
| Table Load Capacity | 3,306.9 lb | 1,500 kg |
| Spindle Center to Column | 27.953" | 710 mm |
| Max Spindle Nose to Table | 28.937" | 735 mm |
| Spindle Motor | 14.8 hp | 11 kW |
| Spindle Speed | 15,000 RPM | 15,000 RPM |
| Spindle Taper | CAT40 BIG PLUS | CAT40 BIG PLUS |
| X/Y Axis Rapid Feed Rate | 1,417.3 in/min. | 36 m/min. |
| Z-Axis Rapid Feed Rate | 944.9 in/min. | 24 m/min. |
| Cutting Feed Rate | 590.6 in/min. | 15 m/min. |
| ATC | 40 | 40 |
| Max. Tool Length | 9.8425" | 250 mm |
| Max. Tool Weight | 15.4 lb | 7 kg |
| CN Control | MITSUBISHI M80 | MITSUBISHI M80 |
MITSUBISHI M80 with 15" LCD SCREEN
15,000 RPM DIRECT-DRIVEN SPINDLE CAT40 DUAL CONTACT BIG PLUS
40 TOOLS ATC MAGAZINE
SPINDLE MOTOR 15/18.5(H) kW, SERVO MOTOR DRIVEN
20 BAR COOLANT THROUGH SPINDLE, ALLCOOL MB300, WITHOUT CTS TANK, MANUAL PRESSURE ADJ., SINGLE FILTER (HOSES AND ROTARY JOINT 1000PSI CAPABLE)
AIR THROUGH SPINDLE
TWO FLUORESCENT LIGHTS
CHIP WASH DOWN COOLANT
CATERPILLAR-TYPE CHIP CONVEYOR
CHIP BUCKET
SIDE DOOR WITH WINDOW ON THE LEFT AND RIGHT OF THE MACHINE
ROOF-ENCLOSED SPLASH GUARD
ROLLER LINEAR GUIDEWAY
ELECTRICAL CABINET HEAT EXCHANGER
SPINDLE COOLING SYSTEM
CENTRALIZED AUTOMATIC LUBRICATING
SPINDLE AIR CURTAIN
OIL LUBRICANT SEPARATOR (OIL SKIMMER)
AUTOMATIC POWER-OFF SYSTEM
GLASS-PROTECTED FRONT WINDOW
AIR TANK FOR TOOL MAGAZINE
PACKING SKID (WOOD)
