ERMAK HGD Shears are designed superiorly with high quality material and workmanship and produced to be used for many years in heavy duty working environments without any problem.
A modern design made to the highest European standards: a strong steel weld construction frame retains its rigidity even when working on maximum capacity. This helps to provide a good quality and clean cut and provides an easy cut for the machine as well.
The small cutting angle decreases twisting to a minimum in narrow sheet cutting.
With the help of a 13,75” throat depth on the standard models, it is possible to cut longer sheets than standard machine length and reducing extra labor and handling costs.
| Max Thickness | 0.25" | 6.35 mm |
| Length of Blade | 122" | 3.1 m |
| Hyd/Mech | Hyd | Hyd |
| Back Gauge | 39" | 990.6 mm |
| Power | 15 hp | 11.2 kW |
| SPM | 16 strokes/min. | 16 strokes/min. |
Specifications (subject to buyer verification):
Capacity: 0.25” Mild Steel
Slitting Throat Inside Frame: 13.75”
Cutting Length: 122”
Rake Angle Adjustment: 1.5°
Maximum Stroke Over Full Length: 16/min.
Number of Hold Downs: 14
Hold Down Pressure: 12 Ton
Motor Power: 15 HP
Back Guage Motor: 1 HP
Oil Tank Capacity: 150L
Blade Gap Adjustment (min-max): 0.002” - 0.032”
Stroke Back Gauge Swing Away: 39
Back Gauge Speed: 4.3”/sec.
Number of Plate Support: 2
Throat Depth Inside Frame: 13.77”
Table Length: 135”
Table Height: 35.43”
Machine Width Including Guards: 114”
Overall Length: 151.9”
Overall Height: 86.6”
Weight: 17,195 lbs
Line Voltage: 220V/3ph/60Hz
Equipped With (subject to buyer verification):
Cybelec CybTouch6 CNC Controller
Bosch – Rexroth Hydraulic System
High Pressurized Silent ATOS Pump
Front Support Arms with Ruler and Flip Stops
Foot Pedal
Cutting Line Illumination
Inch / mm Conversion
99 Step Program
Parametric Adjustment
Mono block, welded steel frames rigid to deflection moment and high tensile with ST44 material
One piece honed and chrome plated double acting powerful cylinders
High quality top and bottom blades: Bottom blade: 4 sided, Top blade, 2 sides
Easily adjustable blade gap adjustment system from a single point
Fast and powerful back gauge with a 39” stroke, moving on ball screws and automatic Swing Away feature
