Or as low as $8,419.25 USD/month over 60 months
Double-Column Machining Center, Fanuc 31iMB Control, 128" x 98.4" x 31.5" Travels, 14.96" x 14.96" Ram, 98.4" Between Columns, 8,000 RPM, 75 HP, CAT50 Big Plus Spindle, Right-Angle Head (6,000 RPM, 20 HP), Auto Head Attachment Changer, 60 Tool Positions, Through-Spindle Coolant, Renishaw Probing System, Low Hours. This 2020 Doosan DBM 2030 is in plant, under power and available immediately. Machine was built in 2020 and installed new in 2022.
| TABLE LENGTH | 118.1" | 2,999.7 mm |
| TABLE WIDTH | 59" | 1,498.6 mm |
| TABLE CAPACITY | 26,400 lb | 11,974.9 kg |
| X-AXIS TRAVEL | 128" | 3,251.2 mm |
| Y-AXIS TRAVEL | 98.4" | 2,499.4 mm |
| Z-AXIS TRAVEL | 31.5" | 800.1 mm |
| C-AXIS ROTATION | 360 DEGREES (1 DEGREE INCREMENTS) | 360 DEGREES (1 DEGREE INCREMENTS) |
| DISTANCE BETWEEN COLUMNS | 98.4" | 2,499.4 mm |
| RAM SIZE | 14.9614 | 14.9614 |
| SPINDLE SPEED | 8,000 RPM | 8,000 RPM |
| SPINDLE MOTOR | 75 hp | 55.9 kW |
| SPINDLE TAPER | CAT 50 (BIG PLUS) | CAT 50 (BIG PLUS) |
| TOOL CAPACITY (ATC) | 60 | 60 |
| MAX RAPIDS | 787 in/min. | 20 m/min. |
| CUTTING FEEDRATE | 394 ipm | |
| APPROX MACHINE WEIGHT | 70,500 lb | 31,978.3 kg |
| APPROX MACHINE DIMENSIONS | 346" X 273" x 224" | 346" X 273" x 224" |
INSTALLED NEW IN 2022
FANUC 31iMB CONTROL
DOUBLE-COLUMN MACHINING CENTER
14.96” x 14.96” RAM
8,000 RPM, 75 HP, CAT 50 BIG PLUS SPINDLE (RAM SPINDLE)
RIGHT ANGLE HEAD (6,000 RPM, 20 HP)
SWING AAC-2 STATIONS (AUTOMATIC HEAD ATTACHMENT CHANGER)
60 TOOL POSITIONS
THROUGH-SPINDLE COOLANT (290 PSI)
THROUGH-SPINDLE AIR SWITCHABLE
RENISHAW PROBING SYSTEM (RMP600, TS27R & RMIQ)
HINGE BELT LIFT-UP CHIP CONVEYOR (44” DISCHARGE HEIGHT)
DUAL Z-AXIS BALLSCREWS
8-POINT BOX GUIDEWAY ON RAM
LARGE LMG GUIDEWAYS FOR THE X & Y AXES
** AS OF MARCH 2025, OPERATING TIME – 2,584 HOURS
** FULL REPLACEMENT COST, AS EQUIPPED - $650,000
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
** MACHINE WAS PURCHASED & INSTALLED NEW IN 2022 (BUILT IN 2020)
FROM DOOSAN:
THE DBM 2030 IS A MULTI-PURPOSE, FIXED CROSS RAIL, DOUBLE-COLUMN MACHINING CENTER FOR APPLICATIONS SUCH AS HEAVY DUTY MACHINNG OF LARGE PARTS AND HIGH-PRECISION DIES AND MOLDS. DESIGNED WITH THE HIGHEST SPECIFICATIONS IN CLASS, THE DBM 2030 PROVIDES A BROAD RANGE OF MACHINING CAPABILITIES.
THE HIGHLY RIGID, SQUARE TYPE BOX GUIDEWAY RAM HAS A CROSS SECTION OF 14.96” x 14.96”, WHICH IS THE BIGGEST IN ITS CLASS. THE RAM SLIDES ON (8) ANTI-FRICTION GUIDES THAT ARE THE FULL HEIGHT OF THE SADDLE FOR EXTREMELY HIGH RIGIDITY & VIBRATION DAMPENING.
