2012 WILLIS PA45 12030 Heavy Duty Engine Lathe, 12.5" Hole Thru, Front and Rear Chucks, 18 Speeds
The outstanding features of the Willis Mammoth Lathes PK II include: one piece solid base casting, two shear bed way with extra way supporting the apron, with a 12.5 inch spindle bore and optional up to 30 inches, 6-way power feed and rapid traverse are standard, 30 HP spindle motor standard with optional to 50 HP, wide range of speeds, feeds and threads.
One piece bed, floor type casting.
2 shear bed way with extra way supporting the apron.
All ways are hardened and ground.
Alloy steel spindle with opposed taper roller bearings.
Hardened and ground gears, shafts and cross slide ways.
Electromagnetic spindle brake.
18-speed geared headstock.
6-way rapid traverse and power feed to top slide.
Totally enclosed universal inch / metric gear box.
Carriage position device.
Dual voltage spindle motor, 30 to 50 HP.
Pressurized one shot lube system for cross slide and carriage.
| Swing | 45.8" | 1,163.3 mm |
| Swing | 45.8" | 1,163.3 mm |
| Centers | 120" | 3,048 mm |
| Centers | 120" | 3,048 mm |
| Spindle Bore | 12.5" | 317.5 mm |
| Spindle Bore | 12.5" | 317.5 mm |
| Swing Over Cross Slide | 33.1" | 840.74 mm |
| Swing Over Cross Slide | 33.1" | 840.74 mm |
Swing 45"
Swing In Gap 63"
Swing over cross slide 33"
Disance Between Centers 120"
Gap size........10" high x 16" long
Spindle Bore 12.5"
Voltage 480/3/60
Equipped With
Front and Rear Chucks
Taper Attachment
Inch Metric Threading
Quick Change tool Post
Tailstock
Dial Thread Chasing Attachment
