New GMC 20 x 80 Gap Bed Metal Lathe 3-18 Bore 2-Axis DRO GML-2080
Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.
ISO 9001 certified
1-Year Parts Only Warranty
Large spindle bore 3-1/8”
Spindle D1-8
Guideway width 12”
Main motor 10HP
16 spindle speeds from 25-1,800 rpm, 12 speeds
4-way rapid traverse on the carriage longitudinal and cross
60 kinds of inch threads, and 41 kinds of metric threads
Threading and feeding rate change without changing gears
Spindle is balanced, hardened and precision ground
Spindle is supported at 3-point by high precision bearings
All gears and shafts are hardened and precision ground
Guideways induction hardened and precision ground
Automatic lubrication system in headstock and feed box
Max. swing over bed 20"
Max. length of workpiece 80"
Max. swing over cross slide 12 1/2"
Max. Swing in gap 29-1/8"
Width of Bed 12"
Effective length in gap to spindle 6"
Effective length in gap to chuck jaws 3 1/2"
Spindle bore 3 1/8" | D1-8
Taper of spindle center M.T. #7
Spindle speeds 25-1,800 rpm / 12 steps
Longitudinal feeds 0.0011-0.063 IPR, 42 kinds
Cross feeds 0.0003-0.018 IPR, 42 kinds
Inch threads 2-112 TPI, 60 kinds
Metric threads 0.1-14 mm , 41 kinds
Diametral Pitch threads 4-112DP , 50 kinds
Module threads 0.1-7mm, 34 kinds
Max. travel of top slide 5"
Max. travel of cross slide 11 1/4"
Spindle length w/o chuck
Leadscrew length X TPI
17-1/2"
1 1/4" x 4 TPI
Diameter of tailstock quill 2-3/8”
Max. travel of tailstock quill
5-1/8”
Taper of tailstock quill center MT4
Main motor
10 HP 3 Ph.
Prewired: 220VAC / 35A
Optional: 440VAC / 20A
Coolant pump
1/8 HP 3 Ph.
Prewired: 220VAC
Optional: 440VAC
Net weight 6,350 lbs.
Overall dimensions, LxWxH 128" x 43" x 59"
Free Taper turning attachment, , installed
Free SINO DRO, installed
Automatic kick-out longitudinal carriage stop system
10” 3-jaw chuck with top reversible jaws, direct mount
12” 4-jaw chuck, direct mount
14” Face plate
1/2”-6” steady rest with roller jaws
7/8”-4-3/8” follow rest
Removeable gap
4-way tools post
Foot brake
Halogen Work light and coolant system
Full length splash guard
Dead centers
Thread chasing dial
Tool box and leveling pads
- 5-C Hand lever type collet closer, free install - CALL FOR PRICE
- 33 pc 5C collet set, from 1/16”-1-1/16” by 32 nd , Part# 3900-0014 - CALL FOR PRICE
- ALORIS type QC tool post set # 3900-5260-300, 6 pcs - CALL FOR PRICE
- Live Center # 3900-5004 for tailstock - CALL FOR PRICE
- Live Center # 3900-5005 for headstock - CALL FOR PRICE
- ¾ to 10-1/2” large steady rest with roller jaws - CALL FOR PRICE
