OKAMOTO 1632N Grinder, Reciprocating Surface, 1989, used. Specifications: Table 15.7" x 37.4", 5 hp, Grinding Wheel 1.5" x 14". Includes SONY Two Axis Digital Read Out, 16" x 32" Electromagnetic Chuck, Hydraulic Feed, Coolant Tank, 3-Phase Spindle Motor.
| TABLE WIDTH | 15.7" | 398.78 mm |
| TABLE LENGTH | 37.4" | 949.96 mm |
| Spindle (Horz/Vert) | Horz | Horz |
| HORSEPOWER | 5 hp | 3.7 kW |
| GRINDING WHEEL WIDTH | 1.5" | 38.1 mm |
| GRINDING WHEEL DIAMETER | 14" | 355.6 mm |
| Dimensions | 96" x 80" x 88" | 96" x 80" x 88" |
| Weight | 7780 LBS | 7780 LBS |
MAXIMUM GRINDING: 16" WIDE x 32" LONG
MAXIMUM VERTICAL CLEARANCE:
14" DIAMETER WHEEL (50 Hz): 20.6"
12" DIAMETER WHEEL (60 Hz): 21.6"
TABLE LOAD CAPACITY: 1,550 LBS
MAXIMUM TABLE TRAVEL (MANUAL): 17.3" x 37.4"
TABLE WORKING SURFACE: 15.7" x 37.4"
LONGITUDINAL MOVEMENT OF TABLE
HYDRAULIC FEED: 10' to 83' PER MINUTE
CROSS MOVEMENT OF SADDLE
HYDRAULIC INTERMITTENT FEED: 0.02" TO 0.8"
HYDRAULIC CONTINUOUS FEED: 8" TO 40" PER MINUTE
HAND FEED PER REVOLUTION: 0.25"
GRADUATION OF HANDWHEEL: 0.001"
VERTICAL MOVEMENT OF WHEELHEAD
AUTOMATIC FEED PER TABLE STROKE: 0.0002" TO 0.0015"
AUTOMATIC FEED PER SADDLE REVERSAL: 0.0002 TO 0.0015"
HAND FEED PER REVOLUTION: 0.05"
MANUAL INCREMENTAL FEED: 0.0001" TO 0.0015"
GRADUATION OF HANDWHEEL: 0.0001"
RAPID FEED (50/60 Hz): 16"/19" PER MINUTE
GRINDING WHEEL DIAMETER (50/60 Hz): 14"/12"
GRINDING WHEEL WIDTH: 1-1/2"
GRINDING WHEEL BORE: 5"
SONY TWO AXIS DIGITAL READ OUT
16" X 32" ELECTROMAGNETIC CHUCK WITH OS WALKER CONTROL
HYDRAULIC ICREMENTAL POWER DOWN FEED
RAPIDE UP/DOWN TO WHEEL HEAD
SPARK OUT
(2) WHEEL HUBS)
MANUAL
COOLANT TANK AND PUMP
SPINDLE MOTOR WIRED FOR 3 PHASE, 60 CYCLE, 220 VOLTS
HYDRAULIC PUMP MOTOR 2 HP
VIERTICAL RAPID FEED MOTOR 1/2 HP
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
