USED 2012 DOOSAN PUMA 2100MS

Live Tool, Sub Spindle

Doosan Puma 2100MS Live Tool CNC Lathe (2012)

Chuck Size 8" 3-Jaw
Sub Spindle Chuck 6" 3-Jaw
Swing over bed mm (inch) 780 (30.7)
Swing over front door mm (inch) 680 (26.8)
Swing over saddle* mm (inch) 630 (24.8)
Recom. Turning diameter mm (inch) 210 (8.3)
Max. turning diameter mm (inch) 481 (18.9) 406 (16.0)
Max. turning length mm (inch) 545 / 785
(21.5 / 30.9)
520 / 760
(20.5 / 29.9)
Bar working diameter mm (inch) 65 (2.6)
Travels
Travel distance
X-axis mm (inch) 260 (10.2)
Z-axis mm (inch) 590 / 830 (23.2 / 32.7)
Y-axis mm (inch) -
B-axis mm (inch) - 590 / 830
(23.2 / 32.7)
Feedrates
Rapid traverse
X-axis m/min (ipm) 30 (1181.1)
Z-axis m/min (ipm) 30 (1181.1)
Y-axis m/min (ipm) -
B-axis m/min (ipm) - 30 (1181.1)
Spindle Spindle speed (Belt Type) r/min 4500
Spindle speed (Built-in Type) r/min -
Spindle nose ASA A2#6
Spindle bearing diameter (Front) mm (inch) 120 (4.7)
Spindle through hole diameter mm (inch) 76 (3.0)
Min. spindle indexing angle (C-axis) deg - 0.001
Turret No. of tool stations st 12 12 {24}*
OD tool size mm (inch) 25 (1.0) 25 {20}* (1.0 {0.8})
Boring bar diameter mm (inch) 50 (2.0) 40 {32}* (1.6 {1.3})
Indexing time (1st swivel time) s 0.15
Rotary tool spindle speed r/min - 5000
Tail stock Quill diameter mm (inch) 80 (3.1) -
Quill bore taper (Live) MT#4 -
Compressed air supply mm (inch) 80 (3.1) -
Sub-spindle Spindle speed (Belt [Built-in]) r/min - 4500
Spindle nose - ASA A2-5
Spindle bearing diameter (Front) mm (inch) - 90 (3.5)
Spindle through hole diameter mm (inch) - 62 (2.4)
Min. spindle indexing angle (C-axis) deg - 0.001
Motors Main spindle motor kW (Hp) 25 / 18.5 /15 (33.5 / 24.8 / 20.1)
(S6 25% / S6 60% / S1 Cont.)
Sub spindle motor kW (Hp) - 7.5 / 5.5 (10 / 7)
Rotary tool spindle motor kW (Hp) - 5.5 (7)
Coolant pump motor kW (Hp) 0.4 (0)
Power
source Electric power supply (Rated capacity) kVA 32.78 33.7 45.56
Machine
size
Machine height mm (inch) 1900 (74.8)
Machine dimension
length mm (inch) 3310 / 3530 (130.3 / 139.0)
width mm (inch) 1863 (73.3)
Machine weight kg (lb) 4850 / 5350

Fanuc Series I CN Control
3 Jaw Chuck On Main
3 Jaw Chuck on Subspindle
C-Axis On Main & Sub Spindles
Sub Spindle
Live Tooling
12 Position Turret
Chip Conveyor
Tool Presetter
High Pressure Coolant ChipBlaster Available for an additional $3,900