• Includes as standard SMART TOUCH
Film Auditing Technology control panel
with easy-to-use interface to store
production data for film cost per pallet.
Has the ability to customize separate
wrap patterns for different loads.
Provides visual diagnostics for
quick and easy troubleshooting.
• Can be programmed to apply different
force-to-load (tension) settings on
5 separate zones of the load to
provide correct load containment
where needed.
• Wraps large loads up to a
67” L x 67” W x 80” H
with a 4500# weight capacity.
• Options available for most special applications including scale packages, large loads, different environments, auto film cutting, roping device to secure the load to the pallet, etc.
PRODUCTION SPEED:
Up to 35 loads per hour
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
LOAD CAPACITY:
Maximum load weight: 4500# dynamic – 10,000# static
HP - Maximum load size to safely clear the tower: 67” x 67” x 80” H (95” max load diagonal)
HIGH PROFILE TURNTABLE:
48” Octagonal formed steel plate
4 point caster support system
Turntable height less than 11” from floor
ANSI # 50 direct chain drive c/w chain tensioner
Between 3 and 12 RPM rotational speed c/w soft start acceleration
1/2 HP AC variable speed motor
Final revolution deceleration and positive stop alignment
Front and back forklift ports for easy movement
Accu-Count exact turntable positioning system for additional film savings
FILM CARRIAGE ELEVATOR:
1/2 HP AC variable speed motor
ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
FILM DELIVERY SYSTEM:
20” pre-stretch film carriage
Maximum film to roller contact
Load cell electronic corner compensation
33% to 313% fixed stretch capability
Variable pre-stretch ratio with easy change
Carriage Descent Obstruction Safety Shut-Off Device
Safety Door with auto power cut-off switch
lifetime warranty on pre-stretch rollers
.CONTROL FEATURES:
7” color touch screen with diagnostics and advanced film auditing capabilities
Power Off – On – Reset switch & Power On indicator light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Reinforce Wrap control for mid-wrapping
Base or Top Wraps First program
Up Only or Up/Down wrap program
Emergency Stop button
Turntable Jog button
Film Carriage Lower & Raise buttons
Film Tension (Force-to-Load) control
Separate film carriage raise & lower speed controls
Operator programmable turntable speed control
Triple beam automatic load height detection sensor for dark or shiny loads
Separate 1 to 12 revolution top & bottom wrap control
Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
Cycle counter
Ten (10) wrap program selector with capability to input and store unique wrapping parameters for each program
PASSWORD PROTECTION - The wrap program selection and wrap program setting can be password protected when turned “ON” by management after creating a password.
STRUCTURAL FEATURES:
All structural and formed steel construction
Forklift truck portable base structure design – lifting tubes included for front and rear access
Electro-static powder coated paint finish
ELECTRICAL INPUT REQUIREMENTS:
115 Volts 1 Phase 60 Hz 15 Amps with dedicated service
Smart Touch 7” touch screen controls provide film auditing and diagnostics Included
Film Usage & Cost Monitoring - stores film usage and cost per load for up to 30 loads. Included
Diagnostics – provides visual operating status of switches and sensors to simplify troubleshooting Included
Load Cell Corner Compensation - for smooth and correct film dispensing Included
Innovative programming for ten (10) separate wrap patterns, each having individual settings for:
- different top and bottom wrap counts
- different force-to-load settings for 5 separate zones on the load
- different spiral speed settings
- different settings for a variety of load types
Includes LCD operator interface with visual helpful diagnostic
capability for trouble shooting assistance. Can be Programmed to
reduce force-to-load (tension) at the bottom so the film will not
break on sharp pallet corners. Included
Maintenance Notification – alerts maintenance for recommended service based on cycle counter Included
Multi-Zone Force to Load – can apply different force to load settings in five (5) separate zones Included
