Used Giddings & Lewis 5' X 13" Radial Arm Drill
| Arm Length | 5' | 1.5 m |
| Column Dia. | 13" | 330.2 mm |
| RPM | 1,600 RPM | 1,600 RPM |
| Power | 15 hp | 11.2 kW |
| Dimensions | R-L 120″ x F-B 60″ X Height 120" | R-L 120″ x F-B 60″ X Height 120" |
| Weight | 17,000 Lbs | 17,000 Lbs |
SPECIFICATIONS:
ARM LENGTH:..................................5′
COLUMN DIAMETER:.............................13″
SPINDLE SPEEDS:..............................(32) 40-1600 RPM
MORSE TAPER IN SPINDLE:......................# 5
DIAMETER OF SPINDLE AT POINT OF DRIVE:.......3 1/4”
FEED RANGE:..................................(9) .006 – .125 IPR
FEED TAP LEADS:..............................8 & 11 1/2 TPI
MINIMUM DISTANCE FACE OF COLUMN TO SPINDLE:..15″
HORIZONTAL TRAVERSE OF HEAD ON ARM:..........48″
DISTANCE SPINDLE TO BASE: MINIMUM:...........27″
DISTANCE SPINDLE TO BASE: MAXIMUM:...........87″
TRAVEL OF SPINDLE IN HEAD:...................20″
TRAVERSE OF ARM ON COLUMN:...................55″
HEIGHT OF BASE:..............................12"
MAIN DRIVE MOTOR:............................15 HP
ELECTRICS:...................................230/ 460 V/ 3 PH/ 60 HZ
FLOOR SPACE:.................................R-L 120″ x F-B 60″
Machine Height:..............................120"
WEIGHT:......................................17,000 LBS
POWER CLAMPING TO COLUMN AND HEAD............Yes
POWER RAPID HEAD TRAVERSE....................Yes
HYDRAULIC PRE-SELECT OF FEED AND SPEEDS......Yes
HYDRAULIC POWER CLAMPING OF HEAD AND ARM.....Yes
HYDRAULIC POWER ELEVATION OF ARM ON COLUMN...Yes
COOLANT SYSTEM...............................Yes
AUTOMATIC LUBRICATION TO HEAD................Yes
CLUTCH ON SPINDLE FEED.......................Yes
