When you are serious about punching, shearing, and bending the made in USA METALpro MP5000FS is your answer. The capabilities of this iron-worker are endless when it comes equipped with our 12” 3-in-1 cutting shear, foot-switch control, and punching station. This bad boy is tough enough to handle nearly anything you throw at it. With 50 tons of power, all run off 110volts you are in control. If you need to get started punching, shearing, and bending on a budget, let Holland Equipment Hunters help you today.
Don't buy from a catalog, buy from a stocking family owned and run dealer located in West Michigan. Every machine sold is fully stood behind for a personal experience.
| Tonnage | 50 T | 45.359 t |
| Power | 1.5 hp | 1.5 hp |
| Throat | 3.75" | 95.25 mm |
| Stroke | 3.75" | 95.25 mm |
| Angle (L1) | 4" | 101.6 mm |
| Angle (L2) | 4" | 101.6 mm |
| Angle (T) | 0.25" | 6.35 mm |
| Dimensions | 24" W x 37" L x 59" H | 24" W x 37" L x 59" H |
| Weight | 625 | 625 |
Country of Origin
USA
Capacity
50 tons
Warranty
3 Years
Shear Capacity - Flat Bar
Up to 1/2" Mild Steel
Shear Capacity - Angle Iron
1/4" x 4" x 4"
Shear Capacity - Rod
3/4"
Shear Capacity - Square
5/8"
Forming Capacity
Up to 1/2" Mild Steel
*brake and forming dies sold separately
Forming Tonnage Capacity
28 Tons
Punch Capacity
Up to 1/2" Mild Steel
Power
110/120V Single Phase
Motor
1.5 horsepower
Hydraulic Pressure
2900psi
Throat Depth
3¾"
Operating Weight
650 lbs
Machine Dimensions
24" x 36.5" x 59"
OSHA/ASNI B11-8
Approved
