200 Ton Dake Model Force 200, 59" Btw Uprights, 19" Ram Travel
| Tonnage | 200 T | 181.437 t |
| Stroke | 19" | 482.6 mm |
| Daylight | 9" - 35" | 889 mm |
| Bed (L-R) | 59" | 1,498.6 mm |
| Up or Downstroke? | Downstroke | Downstroke |
| IPM Closing | 47 in/min. | 119.4 cm/min. |
| IPM Pressing | 7 in/min. | 17.8 cm/min. |
| Dimensions | 103" x 48" x 114" H | 103" x 48" x 114" H |
| Weight | 8,467 lbs. | 8,467 lbs. |
New 200 Ton Dake Force 200 H-Frame Press
Electric Operation
Model Number: Force 200
Capacity: 200 Tons
Motor: 4 HP 220V 3-Phase
Width Between Uprights: 59"
Width Between Table Channels: 14"
Ram To Table: 9" - 35"
Ram Travel: 19"
Footprint: 103" x 48"
Height: 114"
Weight: 8,467 lbs.
Base: 103" x 48"
Ram Advance Speed: 47"/minute
Pressing Speed: 7"/minute
FEATURES:
Double acting cylinder design with 5-part oil seals for smooth operation and a tight seal
Welded heavy steel plate frame for greater rigidity
All electrical controls are low voltage (24V)
Preset and factory-sealed relief valve to prevent exceeding pressure capacity
Ram has lifting eyes that attach a chain to hydraulically move the table
2 HP submerged motor drives two centrifugal pumps for quiet, steady oil flow
Smooth, responsive control valve
Rapid advance of the ram to the workpiece – speed shifts automatically when contact is made
STANDARD EQUIPMENT:
Frame
2 Steel Table Plates
Lifting Chain
Workhead
Pressure Gauge
Safety Relief Valve
