B-Axis Mill-Turn, 5-Axis Simultaneous, 20,000 RPM Milling Spindle (CAPTO C5), 76-Station Tool Changer, Y-Axis, 2.6" Bar Capacity (Main Spindle), Sub Spindle, Lower Turret (Live Milling), Parts Conveyor, Parts Unloader, High-Pressure Coolant, Low Hours. This 2017 DMG MORI NTX 1000/SZM is in plant, under power and available immediately.
| SWING OVER CROSS SLIDE | 17.7" | 449.58 mm |
| MAX CUTTING DIAMETER | 16.9" | 429.26 mm |
| MAX CUTTING LENGTH | 31.4" | 797.56 mm |
| DISTANCE BETWEEN CENTERS | 41.3" | 1,049 mm |
| X-AXIS TRAVEL | 17.9" | 454.66 mm |
| Y-AXIS | Yes | Yes |
| Y-AXIS TRAVEL | +/- 4.1" | +/- 4.1" |
| Z-AXIS TRAVEL | 31.5" | 800.1 mm |
| BAR CAPACITY | 2.6" | 66.04 mm |
| SPINDLE BORE | 2.9" | 73.66 mm |
| SPINDLE NOSE | A2-6 | A2-6 |
| SPINDLE MOTOR | 30 hp | 22.4 kW |
| SPINDLE SPEED | 5,000 RPM | 5,000 RPM |
| SUB SPINDLE | Yes | Yes |
| SUB SPINDLE - SPINDLE BORE | 2.4" | 60.96 mm |
| SUB SPINDLE - SPINDLE NOSE | A2-5 | A2-5 |
| SUB SPINDLE - SPINDLE MOTOR | 25 hp | 18.6 kW |
| SUB SPINDLE - SPINDLE SPEED | 6,000 RPM | 6,000 RPM |
| B-AXIS MILLING SPEED | 20,000 RPM | 20,000 RPM |
| B-AXIS SPINDLE TAPER | CAPTO C5 | CAPTO C5 |
| B-AXIS TOOL POSITIONS | 76 | 76 |
| B-AXIS TRAVEL | +/- 120 DEGREES | +/- 120 DEGREES |
| LIVE MILLING | Yes | Yes |
| LIVE MILLING SPEED | 10,000 RPM | 10,000 RPM |
| TURRET 2 CAPACITY | 10 STATIONS (ALL LIVE CAPABLE) | 10 STATIONS (ALL LIVE CAPABLE) |
| TURRET 2 TYPE | BMT | BMT |
| TURRET 2 - X-AXIS TRAVEL | 6.3" | 160.02 mm |
| TURRET 2 - Z-AXIS TRAVEL | 28.7" | 728.98 mm |
5-AXIS SIMULTANEOUS MACHINING
FANUC 31iB5 CONTROL (CELOS ERGOline Touch)
IEMCA KID 80 MAGAZINE BAR FEEDER (63” MAX LENGTH)
B-AXIS MILLING SPINDLE (20,000 RPM, CAPTO C5)
76-STATION TOOL CHANGER
Y-AXIS
LOWER TURRET
LIVE MILLING ON LOWER TURRET (10,000 RPM)
SUB SPINDLE
ROYAL QG80 COLLET CHUCKS (MAIN & SUB)
TOOL PRESETTER
CHIP CONVEYOR
PARTS CONVEYOR
PARTS UNLOADER
MP SYSTEMS HIGH-PRESSURE COOLANT UNIT (1,000 PSI)
GEAR HOBBING OPTION ON MAIN TURNING SPINDLE
MAGNA SCALES ON B-AXIS
APPROX. 10-20 CAPTO TOOL HOLDERS
** AS OF MARCH 2025, CUTTING TIME – 3,388 HOURS (HEAD 1)
** AS OF MARCH 2025, CUTTING TIME – 715 HOURS (HEAD 2)
** MACHINE CUT PRIMARILY STAINLESS & TOOL STEEL
** FULL REPLACEMENT COST, AS EQUIPPED - $650,000+
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
