28 Ton Hull, 4 post, upstroke, 15" x 15" hot plates, 8 ton top transfer, #29333
| Tonnage | 28 T | 25.401 t |
| Tonnage of Transfer Ram | 8 T | |
| Stroke | 6" | 152.4 mm |
| Daylight | 21" | 533.4 mm |
| Bed (L-R) | 18.75" | 476.25 mm |
| Bed (F-B) | 18" | 457.2 mm |
| Heated Platen (F-B) | 15 in | |
| Heated Platen (L-R) | 15 in | |
| Up or Downstroke? | Downstroke | Downstroke |
| IPM Closing | 300 in/min. | 762 cm/min. |
| IPM Pressing | 35 in/min. | 88.9 cm/min. |
| IPM Return | 240"/minute | 240"/minute |
| Dimensions | 60" L-R x 36" F-B x 91" H | 60" L-R x 36" F-B x 91" H |
| Weight | 4500 lbs. | 4500 lbs. |
USED 28 TON HULL MODEL 359D HYDRAULIC TRANSFER MOLDING PRESS
With 8 ton top transfer
4 post upstroke type; floor standing; cabinet style
Distance between 1.75" dia. posts: 18.75" L-R x 9.25" F-B
Platen area (nominal): 18.75" L-R x 18" F-B
Stroke of fully guided platen: 0 - 6" maximum
Stroke of hydraulic transfer ram: 0 - 8" maximum
Daylight opening (total): 21" maximum
Daylight opening between
hot plates: (1): 10.5" maximum w/current setup
Hot plates (2): 15" L-R x 15" F-B x 2.5" thick
(electrically heated)
Bottom ejector rod spacings: 17.5" L-R
Main ram diameter (1): 6"/4" @ 2000 psi - 28 tons
Transfer ram diameter (1): 3.25"/2" @ 2000 psi - 8 tons
Floor to top of moving platen: 46"
Power unit (base of press): Hydraulic pump, driven by
5 HP 1150 RPM 230/460/3/60 motor
Speeds approx.: CLAMP TRANSFER
300"/minute closing 460"/minute closing
0-35"/minute pressing to 28 tons 0-125"/minute pressing to 8 tons
240"/minute return 725"/minute return
Weight approx. 4500 lbs.
Overall dimensions approx. 60" L-R x 36" F-B x 91" H
Serial no. 2682
Stock no. 29333
FOB ELK GROVE VILLAGE, IL
Controls:
Pushbutton operation w/stroke, pressure & speed control
Dual palm buttons
Selector switch for manual or semi-automatic operation
Cycle timers for close, breathe, dwell & cure
(2) temperature controllers
Mold heater receptacles
Pressure gauges
