NEW COSEN G320

Cosens Model G320 12.8" X 12.8" Fully Automatic Dual Column Band Saw
Cosens G320 is a high production machine which incorporates a massive base,
sturdy saw frame, with an extremely heavy duty gear box, a 5HP drive motor,
and a user friendly programmable control for ease of operation. Rugged,
dependable, and advanced technology, are all words that describe Cosen's
G320 production machine, making it the perfect saw for mass production
settings.

Control System:
Smart NC-100 (SNC-100) technology provides most of the benefits of NC
controlled saws at a mere fraction of the cost. SNC-100 controls are
programmable up to 100 different jobs including quantity and length of cut.
The controls automatically compensate for Kerf loss after data input and
requires no manual calculation of number of times to index.
Machine Features:
Hydraulic dual column design
Gearbox designed to accept high lateral pressure (no thermal distortion)
Inverter blade drive system which allows infinitely variable blade speeds
5.7” HMI touchscreen
Adjustable flood coolant system
Motor driven, synchronized wire blade brush
Carbide blade guides and bearing provides additional blade support
Rigid cast-iron guide arms
Automatic hydraulic blade tensioning device
Cast-iron hydraulic vise
Split vise jaw for reduced burr
Save-A-Blade feature
Precision feed pressure and feed rate dual valve system for optimal cutting
performance Computer controlled multiple indexing up to 999” max length.

Machine Specifications:
Maximum Cutting Capacity Round 12.8”
Square 12.8” x 12.8”
Rectangular 12.8” x 15”
Bundle Width: 7.5” - 11.8”
w/ optional top clamps Height: 2.7” - 5.5”
Remnant Rest Piece 2”
Blade Variable Speed 50 – 328 fpm
Size 13’ 10.9” x 1.25” x .042”
Motor Saw Blade 5 HP
Hydraulic 1 HP
Coolant 1/8 HP
Auto. Material Feed System Job Storage Up to 100 jobs
Single Index Stroke 0” to 15.9”
Multiple Stroke Indexing 0” to 999”
(Automatic kerf compensation)
Weight 4,290 LBS
Power 230V, 3 PH, 60 Hz
(460, 3 PH, 60 Hz Option)
Floor Space 94.37” x 88” x 66.34”
Work Bed Height 31”
Included Accessories
Blade “clip” device eases blade changing when necessary by
holding the blade on the band wheel during installation, making
it very easy for one person to change the blade.
Adjustable fence to support bundled cut-off stock
Additional flushing hose for cleaning
Built in work light
Bi-metal saw blade
Tool Box with tools, leveling pads, and an additional wire brush
Operation & parts manual
Saw frame height encoder
Mitsubishi touch screen control w/ Cosen V_Drive
Full stroke vises
Double retracting vises
Hydraulic powered chip auger

Optional Accessories*
Variable Vise Pressure Regulator
(Part# AHA-10400KIT).............................$1,395.00
Hydraulic Top Clamps (Part# C325H-24000).........$3,295.00
Heavy-duty Roller Table 5’ long
(Part# RT-5-19PM) Capacity- 4200lbs..............$2,695.00
Heavy-duty Roller Table 10’ long
(Part# RT-10-19PM) Capacity- 7700lbs.............$4,095.00
Heavy-duty Roller Table 6’ 6" long w/vertical
Rollers (Part# 05RC-4470-2M) - 5500lbs...........$3,395.00
Micro Droplet Applicator.........................$3,295.00
QR Code Reader...................................$3,195.00
Buck Boost Transformer for incoming power of
208V or below....................................$1,895.00
Voltage change to 460V 3PH.......................$995.00
1 Gallon Misting Oil.............................$99.00
5 Gallon Misting Oil.............................$449.00

*pricing on optional accessories valid only when purchased
with machine.
Pricing may differ when purchased individually without machine.

* Upon receiving equipment, customer is responsible for rigging,
electrical hook-up, primary leveling, and any site improvements
if needed.

*Please note that machine design and specs can change without notice.