DMG Mori NHX-4000 CNC Horizontal Machining Center, New in 2011
| X-Axis | 22" | 558.8 mm |
| Y-Axis | 22" | 558.8 mm |
| Z-Axis | 26" | 660.4 mm |
| # Axis | 3 | 3 |
| Power | 25 hp | 18.6 kW |
| RPM | 12,000 RPM | 12,000 RPM |
| Taper | CAT-40 | CAT-40 |
| # ATC | 40 | 40 |
| Pallet-W | 15.7" | 398.78 mm |
| Pallet-L | 15.7" | 398.78 mm |
| # of Pallets? | 2 | 2 |
| Control | CNC | CNC |
| Dimensions | 107" x 166" x 100" | 107" x 166" x 100" |
| Weight | 16,750 lbs. | 16,750 lbs. |
TRAVELS:
- X-AXIS: 22"
- Y-AXIS: 22"
- Z-AXIS: 26"
-Partial 4th Axis: 1 Degree Increments Thru 360°
PALLET SIZE: 15.7" x 15.7" (2 Pallets)
MAX. WORKPIECE DIAMETER: 24.8"
MAX. WORKPIECE HEIGHT: 35.4"
PALLET LOAD CAPACITY: 881.8 LBS
PALLET (B-AXIS) INDEXING: SINGLE DEG.
PALLET STATIONS: 2
RAPID TRAVERSE RATE: 2,362 IPM
SPINDLE:
- TAPER: CT40
- SPEED: 12,000 RPM
- DRIVE MOTOR: 40 HP
ATC CAPACITY: 40 TOOLS
MAX. TOOL DIAMETER: 2.76"
MAX. TOOL LENGTH: 17.72"
CNC Controls: MSX-8531V
1,000 PSI COolJet High Pressure Coolant Through Spindle.
Coolant System Tank and Pumps
Showa Way Lube System
Chip Conveyor
Tooling (see pictures):
50 Holders
4 Pallets
3 Tombstones
Technic Dovetail Clamp Assemblies:
(3) Long: 24″ Low Profile Universal Dovetail Clamp Assembly
(4) Short: 12″ Universal Dovetail Clamp Assembly
Probing System ($20K New, 3 Years Old):
Spindle Part Probe
Tool Touch Up Probe
Renishaw OMI-2 Optical Receiver & Interface
Electrics: 220 Volt, 3 Phase, 60 Cycle, 103 FLA
Machine Weight (approx.): 16,750 lbs.
Machine Dimensions (approx.): 107" x 166" x 100"
Hours (10 / 2020):
Power On: 17,577
Cutting: 4,606
Note: Hours are about 1,600 hours additional since time of purchase in 2020
