Installed in 2023, Like-New, only 200 Cutting Hours, Simultaneous 5-Axis Machining Center with Turning Function, Doosan CUFOS Control (Fanuc), 18,000 RPM, HSK-T63 Spindle, 31.5" Rotary Table, 120 Tool Positions, Through-Spindle Coolant, Chip Conveyor. This 2020 Doosan DVF 8000T CNC 5-Axis Vertical Machining Center is in plant, under power and available immediately.
| TABLE SIZE | 31.5" | 31.5" |
| TABLE CAPACITY | 1,543 lb | 699.9 kg |
| X-AXIS TRAVEL | 39.37" | 1,000 mm |
| Y-AXIS TRAVEL | 35.43" | 899.92 mm |
| Z-AXIS TRAVEL | 26.97" | 685.04 mm |
| A-AXIS ROTATION | 240 DEGREES (+/- 120 DEGREES) | 240 DEGREES (+/- 120 DEGREES) |
| C-AXIS ROTATION | 360 DEGREES | 360 DEGREES |
| SPINDLE SPEED | 18,000 RPM | 18,000 RPM |
| SPINDLE MOTOR | 30 hp | 22.4 kW |
| SPINDLE TAPER | HSK-T63 | HSK-T63 |
| TOOL CAPACITY (ATC) | 120 | 120 |
| MAX RAPIDS | 1,772 in/min. | 45 m/min. |
| CUTTING FEEDRATE | 885 ipm | |
| APPROX MACHINE WEIGHT | 56,000 lb | 25,401.2 kg |
| APPROX MACHINE DIMENSIONS | 303" x 150" x 150" | 303" x 150" x 150" |
INSTALLED IN 2023 (BUILT 2020)
DOOSAN CUFOS CONTROL (FANUC)
SIMULTANEOUS 5-AXIS VERTICAL MACHINING CENTER WITH TURNING FUNCTION
18,000 RPM SPINDLE (HSK-T63)
31.5” (800MM) ROTARY TABLE
600 RPM DIRECT DRIVE TURNING SPINDLE (C-AXIS)
120 TOOL POSITIONS
RENISHAW PROBE-READY
THROUGH-SPINDLE COOLANT & AIR
CHIP CONVEYOR (REAR DISCHARGE)
SPINDLE CHILLER
COOLANT CHILLER
AICC II 600 BLOCK LOOK AHEAD
INTELLIGENT KINEMATIC COMPENSATION (IKC) SOFTWARE FOR FINE CALIBRATION OF ROTARY AXES
ABSOLUTE GLASS SCALES (X/Y/Z)
ABSOLUTE ROTARY ENCODERS (A & C AXES)
SPINDLE ORIENTATION
RIGID TAPPING
USB PORT
** AS OF APRIL 2025, CUTTING TIME – 286 HOURS
** MACHINE IS LIKE-NEW
** FULL REPLACEMENT COST, AS EQUIPPED - $900,000
** INSTALLED IN SPRING 2023 (WAS A DEMO MACHINE PRIOR TO INSTALL)
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
