150 Ton Wabash, 4-post, 2-opening, 6" str, 20" DL, 30" x 24" htd pltn, inline hot & cold press, #29187
| Tonnage | 150 T | 136.078 t |
| Heating Element | Electric | Electric |
| # of Openings | 2 | 2 |
| Hot/Cold Inline Press? | Yes | Yes |
| Design | 4 Post | 4 Post |
| Up or Downstroke? | Upstroke | Upstroke |
| Heated Platen (L-R) | 30" | 762 mm |
| Heated Platen (F-B) | 24" | 609.6 mm |
| Bed (L-R) | 32 in | |
| Bed (F-B) | 25 in | |
| Stroke | 6" | 152.4 mm |
| Daylight | 20" | 508 mm |
| Dimensions | 72" L-R x 60" F-B x 93" H | 72" L-R x 60" F-B x 93" H |
| Weight | 12,000 lbs. | 12,000 lbs. |
USED 150 TON WABASH HYDRAULIC MOLDING & LAMINATING INLINE PRESS
Model MIL150-3024-4TM; 4 post up-acting type; 2-opening
Floor standing
Distance between 3" dia. posts: 34" L-R x 16" F-B
Platen area (nominal): 32" L-R x 25" F-B
Overall dimensions of platen: 43" L-R x 25" F-B
Stroke of fully guided platen: 0 - 6" maximum
Daylight opening (total): 20" maximum
Daylight opening between hot
plates (2): 3" maximum each
Hot plates (5): 30" L-R x 24" F-B x 2" thick
(electrically heated to 600°F.)
Insulation (2): 28" L-R x 24" F-B x 1" thick
Main ram diameter (2): 8"/3.5" @ 2984 PSI - 150 tons
Floor to top of moving platen: 42"
COLD PRESS:
2-opening
Cold plates (5): 30" L-R x 24" F-B
Power units (base of press):
Hot press: Racine hydraulic pumps, driven by
5 HP 1740 RPM 230/460/3/60 motor
Cold press: Hydraulic press, driven by
1 HP motor
Weight approx. 12,000 lbs.
Overall dimensions approx. 72" L-R x 60" F-B x 93" H
Serial no. 7640
Stock no. 29187
FOB ELK GROVE VILLAGE, IL
Pushbutton operation w/stroke & pressure control
Dual palm buttons
Selector switch for manual or semi-automatic operation
Cycle timers: low pressure, high pressure, cool pressure
(4) digital temperature indicating controllers
(8) amps meters
Low & high pressure gauge
