Bliss 500 Ton Straight Side Twin End Backshaft Driven Mechanical Press, SC2-500-108-60, 108" x 60" bed, 14" stroke, 20-50 SPM, 44" Shut Height, 12" Adjustment. Completely reconditioned. All New Bearings, bushings, seals, packings, all components remachined to parallel, etc..
| Tonnage | 500 T | 453.593 t |
| Stroke | 14" | 355.6 mm |
| Shut Height | 44" | 1,117.6 mm |
| Bed area (Left to right) | 108" | 2,743.2 mm |
| Bed area (Front to back) | 60" | 1,524 mm |
| SPM min. | 20 strokes/min. | 20 strokes/min. |
| SPM max. | 50 strokes/min. | 50 strokes/min. |
| Adjustment | 12" | 304.8 mm |
| Windows Width | 37" | 939.8 mm |
| Slide Area | 108" x 60" | 108" x 60" |
Mechanical Recondition Description;
Clutch/Brake Assembly
All New Clutch/Brake Linings
All new Seals and Packings
All New Bearings
Slide Assembly
Machine bottom of slide to parallel
New Wrist Pin Bushings
Barrels and Screws cleaned up and reassembled
Adjustment assembly all cleaned up and checked out
Clean out ram interior/prime paint
Counterbalance Assemblies;
All New Packings, Seals, and Guide Bushings
Crown Assembly;
New Crankshaft/Machined to new spec. By Superb machine
New Crankshaft Bushings and Connection Arm Bushings
Fit into crown when crank remounted back into crown
Checked entire crown assembly for cracks; none were found
Go through entire lubrication and air system;
Air Clutch and Brake
Air Counterbalances
Recirculating Lubrication System
Hydraulic Tie Rod Nuts
75 HP Dynamatic Eddy Current Drive and Motor
Floor Standing design
